Back to BlogHeating · Fairfax, VA · Northern Virginia

How to Reset Your Furnace Safely, and When You Shouldn't

A reset brings a furnace back after a one-time glitch, but there is a right sequence, a limit of one attempt, and situations where resetting is exactly the wrong move. The safe step-by-step method and the warning signs that mean call instead.

November 2, 2026 By the Fairfax Mechanical Team 7 min read
Short answer: To reset most furnaces, turn the thermostat off, switch off the furnace power switch or its breaker for about 30 seconds, then turn it back on and let the ignition sequence run. Some furnaces also have a dedicated reset button. Reset your furnace only once. If it fails again, or if you smell gas or burning, do not keep resetting. Call a professional. Fairfax Mechanical is an experienced, licensed Virginia HVAC contractor providing same-day heating repair across Fairfax and all of Northern Virginia. Contact us or see our heating repair service.

How to reset your furnace, step by step

  • ✓
    1. Set the thermostat to OffThis prevents a heat call from starting mid-reset.
  • ✓
    2. Turn off the furnace powerUse the service switch, which looks like a light switch on or near the unit, or its dedicated breaker.
  • ✓
    3. Wait about 30 secondsLong enough for the control board to fully reset.
  • ✓
    4. Turn the power back onThen set the thermostat to Heat, a few degrees above room temperature.
  • ✓
    5. Watch the ignition sequenceYou should hear the inducer, then ignition, then the blower. Give it a few minutes.

Some furnaces, especially oil furnaces and some gas units, have a dedicated red reset button on the burner or blower motor. Press it once only. Repeatedly pressing a reset button can flood the system or be dangerous.

When you should not reset your furnace

Resetting is a safe first step for a one-time glitch. Stop and call a professional instead of resetting if:

  • ✓
    You smell gasRotten eggs means leave the house and call 911 and your gas utility. Never reset.
  • ✓
    You smell burning plastic or electrical odors, or see smokeShut it off and call.
  • ✓
    The furnace has already tripped its breakerDo not keep resetting a breaker. See our furnace breaker guide.
  • ✓
    It locks out again right after the resetA repeated lockout means a real fault, such as ignition, flame sensor, or pressure switch.
  • ✓
    You would be pressing a reset button more than onceDo not. That overrides a safety device.

Why one reset is the rule

Furnaces lock out on purpose. A safety lockout stops the system after it detects a problem, such as failed ignition, so it does not keep trying unsafely. A single reset clears a one-time glitch. If it locks out again, the safety system is correctly telling you something is actually wrong.

If it locks out again

A repeated lockout narrows to a short list: a dirty flame sensor, a failed igniter, a pressure switch that is not proving draft, a blocked condensate drain, or a gas supply problem. Each of those needs measurement, not another reset.

Related reading: furnace blinking light codes, furnace tripping the breaker, and why a furnace will not turn on.

Why choose Fairfax Mechanical

We are an experienced, licensed Virginia HVAC contractor serving all of Northern Virginia, and we will tell you honestly whether your furnace needs a part or a replacement. See heating repair or contact us.

Reset it once and it still will not heat?

Get Same-Day Heating Repair

Frequently Asked Questions

How do I reset my furnace?
Set the thermostat to off, cut power at the furnace service switch or its breaker for about 30 seconds, restore power, set the thermostat to heat a few degrees above room temperature, and watch the ignition sequence.
Where is the furnace reset button?
Many gas furnaces reset through the power switch or breaker. Some furnaces, and most oil furnaces, have a red reset button on the burner or motor. Press it only once.
How many times can I reset my furnace?
Once. If it fails again, call a professional rather than resetting repeatedly, because repeated lockouts point to a fault that resetting cannot fix.
Should I reset my furnace if I smell gas?
No. Leave the house immediately and call 911 and your gas utility from a safe location.

Need help with your AC?

Free estimate for any HVAC service in Northern Virginia.

Available 24/7

Chat with us anytime!